Guidelines for Safe Use of Water Weights

Things to know and safe use guidelines

1 When laying the water bag on the ground to commence rigging, beware of any sharp

objects that may puncture the water bag.

2 Beware of your surrounding workspace, again to prevent any damage to both equipment and personnel.

3 Ensure the bag is properly secured before commencing filling.

4 Check for any obstructions around test area and ensure you know where the water is to be dumped after the test is complete.

5 Do not hang any additional load off the water bag harnesses or handling straps.

6 When hanging two or more water bags together, ensure filling attachments are facing outwards. This prevents the emptying trunk from getting trapped in the middle of the bags.

7 Do not tamper / remove any of the water bag rigging. If you need to discuss any aspects of this due to a specific problem, please contact Water Weights first.

8 Never walk away from the bag when filling / whilst test is being conducted and never walk under the load.

9 If more than three water bags are to be used together, please contact Water Weights to obtain a rigging arrangement drawing.

10 Water bags should not be used when wind speed is greater than 25 knots.

11 Although all fire hose fittings are standard adapters, other types are available on request.

If you are in any doubt at any time, please contact Water Weights. We would be pleased to advise you on any job or rigging application.

For more info visit www.waterweightsinc.com